pyspy for s60 (Freeware-Python)

Brief:

PySpy is a program designed to carry out Video surveillance with mobile phones that incorporate a camera Photo and the Symbian operating system.

Installation:

PySpy is written in Python and the installation of this language Programming may differ depending on the version of Symbian To have our phone. For further information, please
Consult the wiki PyS60.

http://wiki.opensource.nokia.com/projects/PyS60

]Note : PySpy works with versions of PyS60 above the 1.3.18

Functions menu:

Start / Pause:
————

- Home:
Active immediately motion detection system, starting
From the moment the phone is “armed” and ready to send warnings
If necessary.

- Pause:
Stop motion detection, from now on
Phone is disarmed. This is the default state when
Boots

Home-timed:
Temporiza the beginning in order to give us time to leave
Zone monitored without causing false alarms.

General Settings:
—————–

Alarm:
——
- Activate: (Yes / No)
Enable or disable the option for alarm. If this is unchecked,
There will be no warnings when it detects movement.

- H. Home: (00:00:00 .. 23:59:59)
Specifies to pray the day will be activated the alarm, for it must
Be “Yes” option “Enable”

- H. End: (00:00:00 .. 23:59:59)
Specifies to pray the day will turn off the alarm.

Presence:
———
- Activate: (Yes / No)
Enable or disable the potion for detecting presence. If this is
Unchecked, there will be no warnings if no movement is detected
For the period specified by the option period. ”

- H. Home: (00:00:00 .. 23:59:59)
Specifies to pray the day will be activated detecting presence,
For it must be “Yes” option “Enable”.

- H. End: (00:00:00 .. 23:59:59)
Specifies to pray the day will turn off detection
Presence.

- Period:
Specifies the maximum interval of time in seconds undetected
Movement to issue warnings.

Language:
——
Select language.

Adjustments Audio / Video:
——————-

Audio:
—–
- Activate: (Yes / No)
Enable or disable reproduction of an audio file when
Detected movement.

- File:
It contains the path to an audio file.
Example: C: \ Audio \ movimiento.wav

Video:
—–
This option can adjust parameters relating to the
Motion detection. The detection is performed by photos
Constantly at low resolution (160 * 120) and comparing
Pixels from one frame to the next. It uses
Technical move RGB pixels (color) and Grayscale
Only comparing changes in luminance.

Left-(0 .. 159), Up (0 .. 119), Right (0 .. 159), Down (0 .. 119):
These parameters acotan the area of photography to examine and
Normally used to exclude an area of surveillance.
This area appears limited to a blue box on the screen
Mobile.

- Threshold: (0 .. 25500)
Variation minimum luminance to decide whether a pixel has changed.

- Pixels: (1 ..)
Minimum number of pixels that must vary to activate the alarm.

- Accuracy: (1 .. 10)
Because the processors are not very powerful phones,
With this option say how many pixels want to “jump”. For
Such as a value “4″ indicates that for every 4 pixels only analyse
1, this improves the speed of detection at the expense of
Precision

Photo:
—-
PySpy detects motion pictures conducting low-resolution (160×120).
Once it has detected movement makes a photo more
Resolution. This section defines the parameters of this
Photo.

- Flash: (car, none, forced)
Mode flash.

- Zoom: (0 ..?)
Zoom.

- Exhibition: (auto, center, night)
Type of exposure.

- Balance: (auto, cloudy, daylight, fluorescent, tungsten)
Balancing whites.

- Resolution: (160×120, 640×480, 800×600, 1024×768, 1600×1200)
Resolution of the picture.

Stocks:
——–

These are the actions to take when it detects movement in the
If the alarm be activated or when motion is detected NE
In a period in the case of detecting the presence be activated.

E-mail:
——
- Activate: (Yes / No)
Enable or disable the sending of one or more e-mails when there is
Convey a warning.

- Server:
Outgoing mail (SMTP).

- Port: (1 .. 65535)
SMTP Port normally is 25.

- Shipper:
Sender message not. Pepe@micasa.com

- Destinations:
One or more e-mail addresses separated by a space
Recipients of the notice.

- Range: (1 ..)
Minimum time (in seconds) between alerts by e-mail, this avoids
Being sent many e-mails in the event of notices
So long.

- Attach: (Yes / No)
Deputy or not the picture on the e-mail.

- Resolution:
Adjusts (only reduces) the resolution of the photo to be affixed. The
Maximum resolution is permitted where there are defined in
“Adjustments Audio / Video -> Photo”

SMS:
—
- Activate: (Yes / No)
Enable or disable the sending of one or more SMS when it
Convey a warning.

- Telephones:
One or more phone numbers separated by a space
Recipients of the notice.

- Range: (1 ..)
Minimum time (in seconds) between sms alerts, this avoids
Being sent many SMS in the event of any notices
So long.

MMS:
—
- Activate: (Yes / No)
Enable or disable the sending of one or more MMS when it
Convey a warning.

- Telephones:
One or more phone numbers separated by a space
Recipients of the notice.

- Range: (1 ..)
Minimum time (in seconds) between warnings by MMS, this avoids
MMS being sent many in the case of notices
So long.

- Resolution:
Adjusts (only reduces) the resolution of the photo to be affixed. The
Maximum resolution is permitted where there are defined in
“Adjustments Audio / Video -> Photo”

Call:
——-
- Activate: (Yes / No)
Enable or disable the sending of one or more calls when it should be
Convey a warning.

- Telephones:
One or more phone numbers separated by a space
Recipients of the notice.

- Range: (1 ..)
Minimum time (in seconds) between notices per call, this avoids
It has many calls in the event of notices
So long.

Archive:
——–
- Activate: (Yes / No)
Enable or disable the picture archiving when it occurs
Notice.

- Directory:
Directory where the photos are stored.
Example: E: \ Images

- Accountant:
Accountant to be used for adding a sequence number to
Photos stored (img00000.jpg)

- Range: (1 ..)
Minimum time (in seconds) between archived images, this avoids
That many images are stored in the event of notices
So long.

- Resolution:
Adjusts (only reduces) the resolution of the photo to be filed. The
Maximum resolution is permitted where there are defined in
“Adjustments Audio / Video -> Photo”

Internet access:
—————
It allows us to select the access point through which is pyspy
Connect to the Internet.

Download :

pyspy_0.2.zip (18 KB)